Show simple item record

dc.identifier.urihttp://hdl.handle.net/11401/76037
dc.description.sponsorshipThis work is sponsored by the Stony Brook University Graduate School in compliance with the requirements for completion of degree.en_US
dc.formatMonograph
dc.format.mediumElectronic Resourceen_US
dc.language.isoen_US
dc.publisherThe Graduate School, Stony Brook University: Stony Brook, NY.
dc.typeDissertation
dcterms.abstractSolar water splitting, a photocatalytic process where water is directly split into hydrogen and oxygen using sunlight absorbing semiconductor materials, is one of the most sought after methods to make hydrogen economy a reality. Oxynitrides containing d0 and d10 cations tend to have the appropriate band structure required for solar water splitting. So far, reported efficiencies are not high enough for practical use and synthesizing an oxynitride showing high enough efficiency remains necessary. In this dissertation, we discuss the synthesis of oxynitrides and studying their optical and photocatalytic properties with a particular emphasis on utilizing exploratory high pressure synthesis. High pressure synthesis is an interesting route to synthesize oxynitrides as this can stabilize reactants that tend to decompose at ambient pressure, helping to achieve the intended stoichiometry. For synthesis, we selected candidate compositions from published theoretical studies. Reactions were carried out at pressures around 1-3 GPa and at temperatures up to 1300⠰C in a multi-anvil large volume press. Phase changes were observed with in situ X-ray scattering. In these experiments, we found that most d0 and d10 cations tend to reduce in the high pressure reaction environment as temperature increases, but Zr4+, Hf4+, and Ta5+ tend to retain their oxidation state. This information will be helpful in future theoretical studies to accurately predict stable oxynitrides synthesizable at high pressure. We synthesized (GaN)1–x(ZnO)x solid solution in the entire composition range at 1 GPa, 1150⠰C. The material showed photocatalytic H2 evolution activity even without surface modification with co catalysts, first such observed for this system. The minimum band gap of 2.65 eV and the highest H2 evolution activity of 2.31 μmol/h were observed at x = 0.51. On our initial investigation on the synthesis of gallium oxynitride spinel (Ga3O3N3) at high pressure, we found that the material could be formed by direct ammonolysis of gallium nitrate hydrate at ambient pressure. The formed product was nanocrystalline and exhibited an indirect band gap of 2.5 eV. The material photocatalytically evolved H2 at an initial rate 8 μmol/ h, but the activity diminished after five hours due to degradation forming gallium oxide hydroxide.
dcterms.available2017-09-18T23:49:51Z
dcterms.contributorGersappe, Dilipen_US
dcterms.contributorParise, John Ben_US
dcterms.contributorKoga, Tadanorien_US
dcterms.contributorWhitaker, Matthew L.en_US
dcterms.creatorDharmagunawardhane, Hingure Arachchilage Naveen
dcterms.dateAccepted2017-09-18T23:49:51Z
dcterms.dateSubmitted2017-09-18T23:49:51Z
dcterms.descriptionDepartment of Materials Science and Engineeringen_US
dcterms.extent107 pg.en_US
dcterms.formatMonograph
dcterms.formatApplication/PDFen_US
dcterms.identifierhttp://hdl.handle.net/11401/76037
dcterms.issued2017-05-01
dcterms.languageen_US
dcterms.provenanceMade available in DSpace on 2017-09-18T23:49:51Z (GMT). No. of bitstreams: 1 Dharmagunawardhane_grad.sunysb_0771E_13198.pdf: 3566632 bytes, checksum: 71249d92661988fdfa719c323930662e (MD5) Previous issue date: 1en
dcterms.publisherThe Graduate School, Stony Brook University: Stony Brook, NY.
dcterms.subjectAmmonolysis, Band Gap, High Pressure Synthesis, Oxynitride, Photocatalysis
dcterms.subjectMaterials Science -- Chemistry -- Inorganic chemistry
dcterms.titleSynthesis of oxynitride materials for solar water splitting: investigations with ambient pressure and high pressure synthesis techniques
dcterms.typeDissertation


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record